Available 24/7 St. Louis 314-876-8048 Kansas City 816-683-1099
George & SonsChimney Services

Installations & upgrades

Wood-Burning Fireplace Installation

Nothing matches a real wood fire — and nothing takes more planning to install. A chimney, clearances, combustion air, a proper hearth and local approvals all have to come together.

A fireplace insert set into a stone-veneer surround with a timber mantel

There's a reason the wood-burning fireplace endures despite every convenient alternative: nothing else delivers the real thing — the crackle, the radiant heat, the genuine fire. It's also, by some distance, the most involved fireplace to install correctly. A wood fire needs a proper chimney to vent, careful clearances to everything combustible, adequate combustion air, a proper non-combustible hearth, and attention to local approvals. Each of those is essential, not optional, and getting them right is what separates a wood-burning fireplace that drafts beautifully and safely from one that smokes, underperforms, or worse. Installation, done properly, is a planning project worthy of the fire it will hold.

Listed or masonry

The first decision shapes the whole project:

  • Factory-built (listed) wood-burning fireplace — a manufactured firebox and chimney system, tested and certified as an assembly. Typically faster and more economical to install, and a very common choice.
  • Masonry fireplace — built on site from brick, block and flue tile. A permanent, traditional structure with the classic look and feel, but a larger, costlier build.

Which suits you depends on your goals, your space and your budget. We help you weigh them, because the path diverges considerably from here — a listed system is an assembly to install correctly; a masonry fireplace is a build.

Why it's the most demanding install

A wood-burning fireplace asks more than any other type, for clear reasons:

It needs a real chimney to vent a wood fire — there's no vent-out-the-wall shortcut. It produces more heat and byproducts to manage. And it requires careful clearances, combustion air, a proper hearth, and structural consideration throughout.

Where a direct-vent gas fireplace might vent out a nearby wall, a wood-burning fireplace almost always needs a chimney rising above the roof, planned for route, support, termination height and clearances — which for a new chimney is chimney installation in its own right. This is exactly why planning matters so much for wood: there are more pieces, and they all have to line up.

Combustion air: the overlooked essential

One planning element that's easy to miss and genuinely affects performance:

A wood fire needs air to burn, and it draws that air from the house. In a tight, well-sealed modern home, a fireplace can struggle to get enough combustion air — which hurts how it draws and can even pull air down other vents. Providing adequate combustion air, sometimes through a dedicated outside-air supply, is part of planning a wood-burning fireplace that drafts well. In newer airtight construction especially, this detail is the difference between a fireplace that pulls cleanly and one that smokes and fights you. We plan for it rather than discovering the problem on the first fire.

Hearth and clearances

Two safety fundamentals built into every correct installation:

  • The hearth — the non-combustible floor area in front of (and under) the fireplace that protects your floor from heat and embers, sized adequately.
  • Clearances — the required distances between the fireplace, its chimney, and combustible materials, maintained throughout.

These aren't aesthetic choices or finishing touches; they're safety requirements the installation builds in from the start. A wood-burning fireplace generates real heat, and the hearth and clearances are what keep that heat where it belongs.

Approvals and local rules

Wood-burning installations carry the most involved permitting of the fireplace types, and we handle it honestly:

They typically involve local permitting and must meet applicable requirements, which can be more involved given the chimney and combustion, and vary by jurisdiction. Some areas have specific rules about new wood-burning appliances, sometimes related to air quality. Whether any such rules apply to your location is something we verify with your local authority as part of planning. We won't assume a wood-burning installation is permitted everywhere, or assume it's restricted — the honest step is confirming the specific local requirements for your property before committing. Getting this right protects you and is part of a legitimate project.

Worth considering: stove or insert?

Before committing to an open wood-burning fireplace, it's worth an honest comparison. An open fireplace is wonderful for ambiance but relatively inefficient — a lot of heat goes up the flue. A wood stove or a wood-burning insert is far more efficient and a better heater. So if heating is your priority, one of those may serve you better; if the traditional open-fire experience is what you're after, the fireplace is the answer. We'll help you weigh ambiance against efficiency rather than assuming which you want.

What affects the scope

Wood-burning fireplace installation scope depends on whether it's a listed factory-built unit or a masonry build, the chimney required (new construction, route, height), the combustion-air provision, the hearth and clearance work, the structure, and local permitting. A listed unit with a straightforward chimney route is one kind of project; a masonry fireplace with a new masonry chimney is a major one.

Preparing for the consultation

  • Decide whether the open-fire experience or heating efficiency matters more to you.
  • Note where you'd want the fireplace and what the space and roof are like.
  • Consider your budget and timeline, since masonry and factory-built differ substantially.
  • Be aware we'll verify local requirements, including any wood-burning-specific rules.

A wood-burning fireplace is the real thing, and installing one right honors that — the proper chimney, the clearances, the combustion air, the hearth, and the local approvals all planned and built in. Get the planning right and you get a fireplace that drafts beautifully and burns safely for decades. That's what careful installation delivers.

Questions about wood-burning fireplace installation

What are my options for a wood-burning fireplace?

Broadly, two: a factory-built (listed) wood-burning fireplace, or a site-built masonry fireplace. A listed factory-built unit is a manufactured firebox and chimney system, tested and certified as an assembly, typically faster and more economical to install. A masonry fireplace is built on site from brick, block and flue tile — a permanent, traditional structure, but a larger, costlier build. Which suits you depends on your goals, your space, and your budget, and it's the first decision to make.

Why is a wood-burning fireplace more involved to install than gas?

Because it needs a real chimney to vent a wood fire, and a wood fire produces more heat and byproducts to manage. That means a proper chimney (new construction or a correctly built flue), careful clearances to combustibles throughout, provision for combustion air, a proper non-combustible hearth, and more structural consideration. A gas fireplace — especially direct-vent — can often vent out a wall; a wood-burning fireplace almost always needs a chimney rising above the roof. It's the most demanding fireplace type to install, which is exactly why planning matters.

Does a wood-burning fireplace always need a chimney?

Yes — a wood fire must vent through a proper chimney, whether that's the integrated chimney system of a listed factory-built unit or a masonry chimney for a masonry fireplace. There's no vent-out-the-wall option as there is with some gas units. Planning the chimney — its route, support, termination height and clearances — is a central part of a wood-burning fireplace installation, and for a new chimney that's chimney installation.

What is combustion air and why does it matter?

A wood fire needs air to burn, and it draws that air from somewhere. In a tight, well-sealed modern home, a fireplace can struggle to get enough combustion air, which hurts how it draws and can even pull air down other vents. Providing adequate combustion air — sometimes a dedicated outside-air supply — is part of planning a wood-burning fireplace that drafts well. It's a detail that's easy to overlook and genuinely affects whether the fireplace performs, especially in newer airtight construction.

What about the hearth and clearances?

Both are essential safety elements. The hearth is the non-combustible floor area in front of (and under) the fireplace that protects your floor from heat and embers, and it must be adequately sized. Clearances are the required distances between the fireplace, its chimney, and combustible materials — maintained throughout the installation. These aren't aesthetic choices; they're safety requirements that a correct installation builds in. We plan the hearth and clearances as fundamental parts of the job, not finishing touches.

Do I need approvals or permits?

Wood-burning fireplace installations typically involve local permitting and must meet applicable requirements, and these can be more involved than for other fireplace types given the chimney and combustion. Requirements vary by jurisdiction, and some areas have specific rules about new wood-burning appliances. We work within the requirements that apply and verify the exact local permitting, inspection, and any wood-burning-specific rules with your local authority as part of planning. We won't assume or overstate — it's confirmed with the actual jurisdiction.

Could local rules restrict a new wood-burning fireplace?

In some areas, yes — certain jurisdictions have rules affecting new wood-burning appliances, sometimes related to air quality. Whether any such rules apply to your location is something to verify with your local authority, which we do as part of planning. We won't promise a wood-burning installation is permitted everywhere or assume it's restricted — the honest step is checking the specific local requirements for your property before committing to the project.

Should I consider a wood stove or insert instead?

It's worth weighing. A wood stove is often more efficient and heats better than an open fireplace, and a wood-burning insert brings that efficiency to an existing fireplace. If your priority is heating, those may serve you better than an open wood-burning fireplace, which is wonderful for ambiance but less efficient. If the traditional open-fire experience is what you want, the fireplace is the answer. We're glad to help you weigh ambiance against heating efficiency.

Works with

Related services

Chimney and fireplace problems rarely sit in isolation. These related services often come up alongside this one.

A fireplace insert set into a stone-veneer surround with a timber mantel Installations

Fireplace Installation

Provide a planning guide by fuel/system, structural/site constraints, venting and clearances; link to the specific installation...

View service →
Two George & Sons technicians servicing a brick chimney on a roof Installations

Chimney Installation

Explain appliance/system selection, route/support/termination planning and listed clearances; separate a masonry build from a...

View service →
Glowing coals inside a wood-burning firebox Installations

Wood Stove Installation

Address placement, floor protection, clearances, connector/chimney route and sizing; keep appliance selection separate from...

View service →
A chimney top opened for relining with clay flue tile visible Installations

Chimney Liner Installation & Relining

Discuss sizing and material compatibility for the actual appliance/fuel, insulation where required, existing-flue condition and...

View service →
Glowing coals inside a wood-burning firebox Fireplace

Wood Stove Repair

Address door/gasket, baffle, firebrick and connected-system condition within manufacturer requirements, without merging appliance...

View service →
A gas log set burning behind glass in a stone-surround fireplace Installations

Fireplace Fuel Conversion

Explain feasibility by existing fireplace and proposed appliance, approved conversion equipment and venting; avoid promising every...

View service →

All 76 services →

Serving Missouri, Illinois & Kansas

Ready when you are — available 24/7

Reach the office nearest you, or send your details and we’ll plan the next step.

St. Louis · 314-876-8048 Kansas City · 816-683-1099 Request service

Request Service Call us