Frequently asked questions
Straight answers about chimneys, fireplaces and how we work
Grouped by topic. Every service page has its own questions too; these are the ones that come up before anyone has picked a service.
Coverage, offices and availability
Where do you work?
Within roughly 65 miles of each of our two offices — St. Louis (2342 S Grand Blvd) and Kansas City (605 Ewing Ave). That covers much of eastern and western Missouri plus nearby Illinois and Kansas. The radius is a straight line, not drive time, so the far side of a large city can fall partly outside it; we confirm coverage by your exact address. Browse the service areas directory.
Do you have offices in Illinois or Kansas?
No. Illinois communities are served from the St. Louis office and Kansas communities from the Kansas City office, across the state line. Our service-area pages describe where we work; they are not additional offices. For installations, the rules that apply are those of the jurisdiction where your property is, and we verify them for your address.
Which number should I call?
314-876-8048 for the St. Louis metro and nearby Illinois; 816-683-1099 for the Kansas City metro and nearby Kansas. Either reaches us, and we'll route you if you're unsure.
What does “Available 24/7” mean?
You can reach us at any hour to describe an urgent chimney or fireplace problem and start a request, and we'll respond. It is not a guaranteed arrival time. Our offices are dispatch locations, not walk-in storefronts. For an active fire, a gas smell or a carbon-monoxide alarm, call 911 or your gas utility first.
Can I walk in to one of your offices?
They're dispatch offices rather than showrooms or storefronts, so the best way to reach us is by phone or the request form. We come to you.
Estimates, pricing and what to expect
Do you give prices over the phone?
Not binding ones. Chimney work depends on what an inspection actually finds, the system you have, and access to it, so a reliable number comes from looking at the specific chimney. Tell us what you're noticing and we'll explain the likely path and what affects the scope.
Do you offer free inspections or estimates?
We don't advertise “free” hooks. An inspection is skilled work that produces findings you can act on; what it costs, and whether any of it is credited toward a repair, is something we discuss up front for your situation rather than promise on a website.
Will you try to sell me work I don't need?
Our approach is to keep three things separate: the symptom you noticed, the finding an inspection documents, and the repair scope those findings support. We recommend only the work the conditions call for, we show you what we found, and we lay out repair versus replacement plainly. If a chimney is in better shape than you feared, we'll say so.
What should I have ready when I call?
What you're noticing and when it happens; your address or ZIP; whether the fireplace is brick masonry or factory-built; and for a gas or factory-built unit, the make and model from the rating plate. Photos of the firebox and of the chimney top from the ground help — never climb onto the roof for one.
Inspections and cleaning
How often should a chimney be inspected or cleaned?
A common guideline is an annual inspection, with cleaning as needed based on use — a heavily used wood-burning system needs sweeping more often than a lightly used or gas one. Rather than quote a blanket interval, we look at your actual usage and system and recommend a sensible schedule.
What are Level 1, 2 and 3 inspections?
They're inspection scopes matched to the situation. Level 1 is a visual check of readily accessible parts, for a system in continued use with no known problems. Level 2 adds accessible areas and typically a camera scan of the flue interior, and is appropriate for a home sale, after a chimney fire or other event, or when the system is being changed. Level 3 examines concealed areas and is reserved for when a serious hidden hazard is suspected. See chimney inspection.
Is a camera inspection the same as a full inspection?
No. The camera is a tool used within an inspection to document the flue interior. A full inspection also considers the crown, cap, exterior masonry, flashing, firebox, damper, smoke chamber and the appliance's venting. A camera clip alone doesn't establish the whole system's condition, and a Level 3 inspection is not “a premium camera scan.”
My chimney looks fine from outside. Does it need checking?
Exterior appearance and internal condition are different questions. The flue liner is hidden and takes the direct heat and gases of the fire, so it ages independently of the brick you can see. A chimney with handsome masonry can have a cracked liner inside — which is the part that matters for safety.
I haven't used my fireplace in years. Can I just light it?
Have it inspected first. Flues deteriorate, crowns crack, liners fail and animals nest whether or not you burn. An inspection confirms the actual condition before the first fire, which is far better than discovering a problem the hard way.
Parts of a chimney, explained
What's the difference between a cap, a crown and a chase cover?
Three different parts at the top. The cap covers the flue opening and keeps rain and animals out. The crown is the sloped masonry or cast slab across the top of a masonry chimney, shedding water off the structure. The chase cover is the metal lid over a framed chase on a factory-built chimney. A masonry chimney has a crown and a cap; a framed chase has a chase cover and a cap over the pipe. See cap installation, crown repair and chase cover replacement.
What's a flue liner and why does it matter?
The liner is the lining inside the flue that contains the fire's heat and combustion gases — including carbon monoxide — and keeps them away from your home's structure. A cracked or deteriorated liner compromises that barrier, which is a safety matter even if the chimney looks fine outside. Relining with a correctly sized liner is the usual remedy for widespread damage.
Masonry fireplace or factory-built: how do I tell, and why does it matter?
A masonry fireplace is built in place from brick and firebrick; a factory-built (prefab) fireplace is a manufactured, listed appliance set into a framed chase, usually with refractory panels and a metal chimney. They look similar from the room but are repaired completely differently: masonry work and compatible mortar for one, correct manufacturer-compatible panels, glass and components for the other. A rating plate inside the firebox or behind a louver usually identifies a factory-built unit.
Why does “compatible mortar” matter on older brick?
Older, softer brick and lime-based mortar behave differently from modern materials. Repointing old masonry with a hard modern mortar can trap moisture and stress the softer brick, causing more damage over time. A compatible (often softer) mortar matched to the original works with the old masonry rather than against it. See tuckpointing.
Should my chimney be waterproofed?
Only with a breathable (vapor-permeable) masonry waterproofing, and only where water is soaking through sound-but-porous brick. A non-breathable sealer traps moisture inside the masonry and makes things worse. Waterproofing also doesn't fix a cracked crown or failed flashing — those need their own repairs. See chimney waterproofing.
Gas fireplaces and safety
What should I do if I smell gas?
Leave the home immediately and call your gas utility or 911 from outside. Don't troubleshoot, don't light the unit, don't flip switches. A gas smell is a safety situation first and a repair second — only once it's been made safe does any repair conversation happen.
My gas fireplace keeps shutting itself off. Can you bypass the safety?
No — and you shouldn't want anyone to. A safety control that shuts a gas appliance down is responding to a real condition: a failing sensor, a venting problem, a valve issue. We find and fix the cause with the correct manufacturer-compatible part. We never defeat or bypass gas safety controls. See gas fireplace repair.
Why do you need my gas fireplace's make and model?
Because a gas fireplace is a tested, listed appliance and its components — valves, burners, ignition parts, sensors, glass — are specified for that model. A generic substitute may not match the unit's specifications, can compromise safe operation and can void the listing. The rating plate (often inside the firebox or behind a louver) tells us which unit you have.
Can I convert my wood fireplace to gas?
Often, but feasibility depends on your specific setup: a gas supply to the fireplace, suitable venting (a gas insert typically needs a correctly sized liner), and a fireplace and flue in appropriate condition. For a factory-built fireplace, the unit must be approved by its manufacturer for the conversion. We assess before recommending. See fireplace conversion.
Do I need a carbon-monoxide alarm?
Yes — with any fuel-burning appliance, a working CO alarm is essential. It's your backstop; proper venting is the first line. We'll always remind you of it, though installing alarms isn't a chimney service and they're simple to place yourself following the manufacturer's guidance.
Common problems
Why does smoke come into the room?
The chimney isn't drafting properly, and that has several possible causes: a flue that's the wrong size for the opening, a cold or partly blocked flue, house depressurization from exhaust fans or HVAC, too little combustion air, or a damper or smoke-chamber problem. Each needs a different fix, so we diagnose rather than sell one universal remedy. See draft repair.
Where is my chimney leaking from?
Water enters at one of three places, each with its own repair: the top (a cracked crown or failed cap), the masonry body (deteriorated joints or spalled brick), or the roof junction (failed flashing). Sometimes more than one. The repair only works if it addresses the actual entry point. See leak repair.
Why does my chimney smell when I'm not using it?
Usually a combination of something in the flue (creosote, soot, debris) and air being drawn down the chimney into the house when it's depressurized. Moisture makes it worse — a damp chimney smells more — so a persistent odor is often a sign of water getting in as much as a cleaning need.
There's an animal in my chimney. Can you remove it?
We're honest about this: live wildlife removal — often involving protected species and wildlife regulations — is typically a licensed wildlife professional's job, not a chimney service's. Once any live animals are gone, we clean out the chimney, remove abandoned nesting material and install a proper cap or animal guard to prevent re-entry. See animal entry prevention.
I had a chimney fire. What now?
Don't use the fireplace until it's been inspected. A chimney fire can crack flue tiles, damage the liner and affect the masonry in ways you can't see from the room. A thorough post-fire inspection with a camera documents the damage and establishes what's needed before the chimney is safe to use again.
Installations, permits and scope
Do I need a permit?
Installations typically involve local permitting and must meet applicable requirements, which vary by jurisdiction — and the governing authority is wherever your property is (a city, a county for unincorporated areas, or the Illinois- or Kansas-side authority across the state line). We verify the current process for your address as part of planning. We won't claim a blanket “no permit needed.”
Why do you ask whether my ZIP matches my municipality?
Because a mailing ZIP is a postal designation, not a jurisdiction. ZIPs often span several municipalities or incorporated and unincorporated areas, so the ZIP alone doesn't establish which authority governs an installation. For routine cleaning and repair it rarely matters; for an installation we confirm the authority by your actual address.
Will a stove or insert really heat better than my open fireplace?
Substantially. An open fireplace sends most of its heat up the flue; a closed, efficient insert or stove captures far more and delivers it to the room, often with a blower. It only delivers that efficiency if it's installed correctly — fitted to the opening and vented through a correctly sized liner or proper vent path — which is why we evaluate the existing opening and vent system first.
Is there work you don't do?
Yes, and we'd rather say so. We don't take on industrial stacks or engineered commercial systems, we don't trap or remove live or protected wildlife, we don't bypass gas safety controls, and we don't respond to active emergencies in place of 911 or the gas utility. Within residential chimneys, fireplaces, stoves and venting, our 76 services cover the system end to end.