Of all the repairs a masonry chimney can need, repointing is one of the most common and one of the most worthwhile — and also one of the most frequently done badly. The reason is that it looks simple from a distance. New mortar in old joints, how hard can it be? But proper repointing is a genuine craft: it depends on removing the old material correctly, choosing compatible mortar, and finishing the joints so they both bond and match. Done right, it renews the chimney for decades. Done as a quick smear over failing joints, it's a cosmetic cover-up that fails fast and sometimes makes things worse.
Mortar is supposed to wear out
It helps to understand what mortar is for. In a brick chimney, the mortar joints are the intentional sacrificial element — designed to be slightly softer than the brick so that weather, movement and freeze-thaw wear the mortar rather than the brick. That's by design: mortar is far easier and cheaper to replace than brick. So mortar failing over time isn't a defect; it's the system working as intended, and renewing it periodically is normal, expected maintenance rather than a sign something went wrong.
The trouble starts when failed mortar is left too long. Open joints let water into the masonry, and then the water goes to work on the brick itself — which is a much more serious and expensive problem than renewing the joints would have been.
How to tell your chimney needs it
The signs are fairly readable once you know them:
- Recessed, cracked or crumbling joints — the mortar has eroded below the brick face or broken up.
- Missing mortar — gaps where chunks have fallen out, sometimes enough to see daylight.
- Sandy residue at the base of the chimney or on the roof below it — disintegrated mortar.
- Loose or shifting bricks — a sign the mortar is no longer holding the assembly together.
The catch is that the most exposed area — the top courses — is also the hardest to inspect from the ground, and it's usually where failure begins. A look from the roof is what tells the real story.
What proper repointing actually involves
This is the part that separates a lasting repair from a quick cover-up:
- Remove the failed mortar. We grind or rake out the deteriorated material to a sound depth — enough for the new mortar to key in and bond, not just skim the surface.
- Pack in new mortar in layers. Fresh mortar is worked into the cleaned joints and compacted so it bonds to the brick and fills the joint fully.
- Finish the joint to match. We tool the joint to the existing profile — concave, flush, raked — so the repair matches the chimney's appearance.
What we don't do is "bag and brush" — smearing a thin coat of mortar over the face of failing joints without removing the old material. It looks like repointing for a little while, then peels and crumbles away, and it traps the underlying problem. If a repair sounds suspiciously fast and cheap, this is often why.
Matching mortar to the masonry
Color and profile matter for appearance, but mortar strength matters for the chimney's survival. On older chimneys especially, the new mortar should be compatible with — and no harder than — the existing brick. An over-hard modern mortar on soft old brick is rigid where it should flex, so the stress transfers into the brick and spalls it. Matching the mortar to the masonry is the difference between a repair that protects the brick and one that quietly damages it. It's a judgment we take seriously rather than defaulting to a single mix.
What affects the scope
Repointing scope depends on how much of the chimney has failed — often just the exposed top courses and weather sides rather than the whole stack — plus the chimney's height and access, how closely the mortar needs to be matched, and whether the brick itself also needs repair. Localized repointing is a modest job; a chimney where the mortar has failed throughout is a larger one.
Preparing for the visit
- Point out where the joints look worst, and whether you've seen sandy debris or loose brick.
- Mention the chimney's age and any past repointing or masonry work.
- Note any water issues inside, which may mean the top needs attention too.
- Clear access to the chimney and roof.
Repointing is maintenance in the truest sense — renewing the part of the chimney built to be renewed. Do it with compatible mortar and real workmanship, keep the water out at the top, and the chimney is good for decades more. That's a genuinely good return on a repair.