Available 24/7 St. Louis 314-876-8048 Kansas City 816-683-1099
George & SonsChimney Services

Inspections

Chimney Inspections

An inspection is a judgment about condition — not a cleaning, not a camera clip, and not an estimate. Here's how to tell which level your situation calls for.

A George & Sons technician running a video camera inspection from the firebox

Of all the chimney services, inspection is the one most worth understanding clearly, because it's the one that tells you what you actually need. An inspection isn't a cleaning, it isn't a video clip, and it isn't an estimate — it's a professional judgment about whether your chimney is in sound, safe, serviceable condition. Everything else follows from it. This page is a plain guide to how inspections are structured, which one fits your situation, and what an honest inspection does and doesn't establish.

The three levels, in plain terms

Chimney inspections are defined by a national standard in three levels of increasing thoroughness. The levels aren't "good, better, best" — they match different circumstances, and more isn't automatically appropriate.

  • Level 1 — a visual examination of the readily accessible portions of the chimney and connected appliance. It's the right scope when the system is being used as it always has been, with no changes and no reason to suspect a hidden problem — the typical annual check.
  • Level 2 — everything in a Level 1, plus accessible areas in the attic, crawl space and basement, and a video scan of the flue interior. It's required by the standard in specific situations: when a property is sold or transferred, when the system is changed (a new appliance, a different fuel, a relined flue), or after an event that could have caused damage, such as a chimney fire, a serious storm, or an earthquake.
  • Level 3 — the most involved. It's performed when a Level 1 or 2 suggests a hidden hazard that can't be evaluated any other way, and it may require accessing concealed areas by removing or opening part of the chimney or structure. It's a targeted response to a specific concern, not a premium package.

A finding, a view, and an estimate are three different things

It's easy to blur these together, so it's worth separating them:

  • A finding is what the inspection determines about condition — a cracked flue tile, a deteriorated crown, a gap at the smoke chamber.
  • A camera view is one piece of evidence used to reach a finding. The camera documents what the flue looks like along its line of sight; it doesn't, by itself, constitute a complete inspection. More on that under video inspection.
  • An estimate is what any recommended repair would involve. It comes after the inspection, once you've seen what was found.

Keeping these separate is how an inspection stays honest. The job of the inspection is to tell you the truth about condition — not to generate work.

What we're actually looking at

A thorough inspection follows the system from top to bottom:

  1. The termination and crown — the cap, the crown or chase cover, and whether water is being kept out at the top.
  2. The exterior masonry or chase — brick, mortar, flashing at the roofline, and signs of movement or water damage.
  3. The flue interior — the liner's condition, cracks, gaps, deposits, and obstructions, documented with a camera where access and line of sight allow.
  4. The smoke chamber, damper and firebox — the working parts just above and within the fireplace.
  5. The connected appliance and its venting — for a stove, insert or gas unit, whether it's correctly and safely vented.

What's included depends on the level, but the thinking is the same: confirm the whole path that carries combustion products out of your home is intact.

Why annual inspection pays for itself

The economic case for inspection is simple: problems caught early are cheap, and problems ignored are expensive. A hairline crack in a crown is a minor repair; the water damage it causes over three unwatched winters is not. Early creosote glazing is manageable; a chimney fire is not. An annual inspection is the regular look that catches small issues while they're still small — which is why the standing guidance is to have any chimney in use inspected at least once a year and cleaned as the findings warrant.

Being honest about scope and standards

We verify the appropriate inspection scope against current standards rather than defaulting to whatever generates the most work. We'll recommend a Level 1 when a Level 1 is right, and we won't call a camera clip a Level 2 or dress up a routine scan as a Level 3. If a situation genuinely calls for deeper access, we'll explain exactly why. And if an inspection turns up a safety concern, we'll tell you plainly — including advising you not to use the chimney until it's addressed.

What affects the scope

The level that's appropriate depends on your circumstances — routine use, a sale, a system change, or a suspected problem — and the inspection itself varies with the type of chimney, its accessibility, and what we find as we go. We'll confirm the right scope with you before we start.

Preparing for the visit

  • Let the fireplace or appliance go cold beforehand.
  • Clear access to the fireplace and, where needed, the attic, basement and roof.
  • Gather any history you have — past work, a known chimney fire, a recent storm, how long you've owned the home.
  • Tell us why you're booking: routine, a sale, a change, or a specific worry. It determines the right level.

An inspection is the foundation every other decision rests on. Get it right, and you know exactly where your chimney stands — and exactly what, if anything, it needs.

Questions about chimney inspections

What's the difference between an inspection and a cleaning?

A cleaning removes soot and creosote; an inspection evaluates whether the chimney is in sound, serviceable condition. They're often done in the same visit — the cleaning gives us a clear surface to inspect — but they answer different questions. A spotless flue can still be unsafe, which is exactly why the inspection exists.

What are the three inspection levels?

They come from the national standard for chimneys. A Level 1 is a visual check of readily accessible areas for a system in continued use under the same conditions. A Level 2 adds accessible attic, crawl space and basement areas plus a video scan of the flue interior, and is called for on sale or transfer, after a change to the system, or after an event like a chimney fire. A Level 3 goes further, accessing concealed areas when a hidden hazard is suspected — and may require opening part of the structure.

Which level do I need?

For routine annual service on an unchanged system you've been using normally, a Level 1 is usually appropriate. Buying or selling a home, changing the appliance or fuel, or following a chimney fire or major weather event calls for a Level 2. A Level 3 is reserved for when a Level 1 or 2 turns up something that can't be evaluated without deeper access. We'll recommend the right one for your actual situation rather than upselling.

Is a camera inspection the same as a full inspection?

No. A camera is a tool used within an inspection — it documents the flue interior along the line of sight. A full inspection is the broader evaluation of the whole system, inside and out, using the camera where it helps. A camera clip alone doesn't replace the judgment of a complete inspection, which is a point worth being clear about.

What does an inspection actually produce?

A clear picture of the chimney's condition: what's sound, what's worn, and what needs attention, explained in plain terms. An inspection identifies findings. If repairs are warranted, those are quoted separately after you've seen the problem — the inspection is the diagnosis, not the sales pitch.

How often should a chimney be inspected?

The widely cited guidance is at least once a year for any chimney in use, with cleaning as needed based on what's found. Annual inspection is how small problems — a hairline crack, a deteriorating crown, early creosote glazing — get caught while they're still small and inexpensive.

Do you inspect gas and factory-built chimneys too, or just masonry?

All of them. Masonry chimneys, factory-built metal chimneys, and the venting for gas and other appliances each have their own things to check, and each benefits from inspection. We identify what you have and apply the right scope — a gas appliance's venting is just as important to confirm as a wood flue, even though it looks cleaner.

Can you inspect a chimney I'm not sure is safe to use?

Yes, and that's exactly when you should. If you've had a chimney fire, a storm, a strange smell or smoke problem, or you simply don't know the chimney's history, an inspection tells you where you stand before you light another fire. When in doubt, don't use it until it's been looked at.

Works with

Related services

Chimney and fireplace problems rarely sit in isolation. These related services often come up alongside this one.

A brick chimney with a hip-style metal cap on a tile roof Inspections

Level 1 Chimney Inspection

Explain readily accessible inspection scope and the situations where a routine unchanged-system evaluation may be appropriate; do...

View service →
A George & Sons technician running a video camera inspection from the firebox Inspections

Level 2 Chimney Inspection

Explain additional accessible areas and internal evaluation, with verified triggers such as changes or transfer; avoid pretending...

View service →
A chimney crown with two clay flue tiles exposed before cap installation Inspections

Level 3 Chimney Inspection

Explain targeted access to concealed areas when indicated; address authorization, scope and repair of opened areas rather than...

View service →
A George & Sons technician running a video camera inspection from the firebox Inspections

Chimney Camera / Video Inspection

Explain what camera imagery can document, line-of-sight limitations, and why a camera scan alone does not replace the full...

View service →
A brick chimney with a sealed crown and two flue caps Inspections

Real Estate Chimney Inspection

Address buyer/seller timing, the difference from a general home inspection, documented findings, and the need to select the actual...

View service →
Heavy creosote and soot buildup around a flue opening before cleaning Cleaning

Chimney Sweeping & Cleaning

Explain what a sweep removes from the flue and connected system; distinguish deposits from damage, and routine sweeping from...

View service →

All 76 services →

Serving Missouri, Illinois & Kansas

Ready when you are — available 24/7

Reach the office nearest you, or send your details and we’ll plan the next step.

St. Louis · 314-876-8048 Kansas City · 816-683-1099 Request service

Request Service Call us