Available 24/7 St. Louis 314-876-8048 Kansas City 816-683-1099
George & SonsChimney Services

Installations & upgrades

Chimney Liner Installation & Relining

Relining puts a correctly sized, sound liner inside an existing flue — the fix for an old chimney that's the wrong size, deteriorated, or being matched to a new appliance.

A chimney top opened for relining with clay flue tile visible

Relining is one of the most common and most quietly important chimney services, because it solves a problem a great many older chimneys have: a flue that's no longer right for the job. Maybe the clay tiles have cracked and deteriorated. Maybe the flue was built for an open fireplace and is now far too large for a modern stove or insert. Maybe you're installing a new appliance that needs a properly sized, suitable liner. In all of these, relining — installing a correctly sized, sound liner inside the existing flue — restores a chimney to proper working order without rebuilding the whole structure. It's a fix that's often more dependable than patching, and it's frequently the key to making a new appliance vent correctly.

What relining is

The concept is simple and elegant:

Relining means installing a new liner — most commonly a stainless steel liner, sized to the appliance — inside the existing chimney flue, run down the flue and connected to the appliance. It restores a sound, correctly sized venting passage without rebuilding the chimney.

Instead of tearing apart masonry to fix a deteriorated or ill-suited flue, you install a new, continuous liner within it. The result is a flue that's the right size, the right material, and sound along its whole length — regardless of the condition of the old clay tiles it replaces the function of.

When relining is the answer

Relining is called for in a few recurring situations:

  • A deteriorated existing liner — cracked or crumbling clay tile beyond practical repair. (For localized, reachable damage, a targeted liner repair may be viable instead.)
  • A wrong-sized flue — very commonly, an old flue built for an open fireplace that's far too large for a modern stove or insert.
  • A new appliance — installing a stove, insert, or other appliance that requires a correctly sized, suitable liner.

In each case, relining addresses the whole flue at once rather than chasing individual defects, which is why it's often the more reliable path.

Sizing: matched to the appliance

The heart of a correct relining is sizing the liner to the specific appliance and fuel:

The liner diameter has to match the appliance's venting requirements — not too small, which restricts it, and not too large, which lets gases cool and draft poorly. The appliance manufacturer specifies the venting requirements, and the liner is sized to meet them. This is why sizing is never a default or a guess; it's matched to what the chimney will actually vent. A liner that's the wrong size defeats the purpose of relining in the first place.

Why "too big" is a real problem

The oversized-flue issue is worth explaining, because it surprises people:

An old masonry flue built for an open fireplace has far more volume than a tight, efficient modern stove or insert needs. The appliance's exhaust gases spread out in all that space, cool down before they reach the top, and that cool, sluggish flow drafts poorly and lets creosote condense rapidly. So a stove vented into a big old flue often draws badly and gets dirty fast — not because anything's broken, but because the flue is simply too large for it. Relining with a correctly sized liner gives the appliance the tight, warm passage it needs to draft well and stay cleaner. This is one of the most common reasons relining transforms a poorly performing setup.

Insulation and material

Two more elements of a correct relining:

  • Insulation. An insulated liner keeps flue gases warmer, improving draft and reducing creosote, and helps maintain safe temperatures — especially important in an exterior or cold chimney. Whether and how a liner is insulated depends on the appliance, fuel, and installation requirements, and we determine what's needed rather than skipping it.
  • Material. Stainless steel is the common choice, with different grades suited to different fuels (wood, gas, oil), because the corrosive byproducts of different fuels affect the material choice. Using the right material and grade for your appliance and fuel is part of doing it correctly.

The existing chimney still matters

Relining isn't a way to ignore a failing chimney. The liner goes into the existing structure, so we assess the chimney it'll occupy — because a liner has to be installed into a sound enough structure, and problems with the surrounding masonry (a failing crown, a deteriorating chimney) may need addressing too. We look at the whole picture rather than dropping a liner into a crumbling chimney and calling it done. A good relining is a correct liner in a suitable chimney.

Part of installing an appliance

Relining very often goes hand in hand with installing an appliance. When you put in a wood stove, an insert, or certain appliances connected to an existing chimney, a correctly sized liner is typically part of a proper installation — the appliance and its liner are a matched system. So relining frequently accompanies wood stove installation or insert installation. A new appliance vented into an unlined or wrong-sized old flue simply isn't a complete, correct installation.

What affects the scope

Relining scope depends on the appliance and fuel, the liner size and material required, whether insulation is needed, the existing flue's configuration and condition, the chimney's height and access, and any surrounding masonry work needed. A straight flue relined for a single appliance is a defined job; an offset flue, an exterior chimney needing insulation, or one needing masonry repair alongside is more involved.

Preparing for the visit

  • Tell us the appliance and fuel the liner will serve (or that you're also selecting the appliance).
  • Mention why you're relining — deterioration, wrong size, or a new appliance.
  • Note the chimney's age and any known issues (cracked tiles, draft problems, past fires).
  • Clear access to the fireplace/appliance and the roof.

Relining is the elegant fix for an old flue that's no longer right — restoring a correctly sized, sound, suitable passage inside the chimney you already have. Sized to the appliance, insulated where needed, made of the right material, and installed into a suitable chimney, a new liner often makes an old chimney work better than it has in years.

Questions about chimney liner installation & relining

What does relining a chimney mean?

Relining means installing a new liner inside the existing chimney flue — most commonly a stainless steel liner sized to the appliance, run down the existing flue and connected to the appliance. It restores a sound, correctly sized venting passage without rebuilding the whole chimney. It's the standard solution for a deteriorated flue, a flue that's the wrong size for an appliance, or when connecting a new stove or insert to an old chimney.

Why would I need to reline rather than repair the existing flue?

Several reasons: the existing clay tile liner is cracked or deteriorated beyond practical repair; the flue is the wrong size for the appliance you want to use (very common — old flues built for open fireplaces are often far too large for a modern stove or insert); or you're installing a new appliance that requires a properly sized, suitable liner. Relining addresses the whole flue at once, which is why it's often more dependable than patching individual defects. See liner repair for when a targeted repair is viable instead.

How is a liner sized?

To the specific appliance and fuel it serves. The liner diameter has to match the appliance's venting requirements — not too small (which restricts it) and not too large (which lets gases cool and draft poorly, and encourages creosote). The appliance manufacturer specifies the venting requirements, and the liner is sized to meet them. This is why sizing isn't a guess or a one-size default — it's matched to what the chimney will actually vent, which is the core of a correct relining.

Why does an old flue being 'too big' cause problems?

It's counterintuitive, but an oversized flue is a real problem for a modern appliance. A big masonry flue built for an open fireplace has far more volume than a tight, efficient stove or insert needs. The appliance's exhaust gases spread out, cool down before they exit, and that cool, slow flow drafts poorly and lets creosote condense rapidly. Relining with a correctly sized liner gives the appliance the tight, warm passage it needs to draft well and stay cleaner.

Does the liner need to be insulated?

Often, yes — insulation is required or strongly beneficial in many situations. An insulated liner keeps the flue gases warmer, which improves draft and reduces creosote, and it's important for performance and for maintaining safe temperatures, especially in an exterior or cold chimney. Whether and how a liner is insulated depends on the appliance, the fuel, and the installation requirements. We determine what's needed rather than skipping it to save effort, because it genuinely affects how the system performs and vents.

What liner materials are used?

Stainless steel is the most common for relining, chosen for its durability and suitability across fuel types, with different grades suited to different fuels (wood, gas, oil). The material has to be compatible with the appliance and fuel — the corrosive byproducts of different fuels affect liner material choice. Using the right material and grade for your specific appliance and fuel is part of doing the relining correctly, not an upsell.

Do you check the existing chimney before relining?

Yes — the existing flue's condition matters. We assess the chimney the liner will go into, because a liner has to be installed into a sound enough structure, and problems with the surrounding masonry (a failing crown, deteriorated chimney) may need addressing too. Relining isn't a way to ignore a crumbling chimney; it's installing a correct liner into a chimney that's suitable to receive one. We look at the whole picture rather than just dropping a liner in.

Is relining part of installing a stove or insert?

Very often, yes. When you install a wood stove, insert, or certain appliances into or connected to an existing chimney, a correctly sized liner is typically part of a proper installation — the appliance and its liner are a matched system. So relining frequently goes hand in hand with wood stove installation or insert installation. A new appliance vented into an unlined or wrong-sized old flue isn't a complete, correct installation.

Works with

Related services

Chimney and fireplace problems rarely sit in isolation. These related services often come up alongside this one.

A chimney top opened for relining with clay flue tile visible Chimney

Chimney Liner Repair

Identify the liner material, condition and connected appliance; distinguish a suitable repair from relining and avoid promising...

View service →
A chimney crown with two clay flue tiles exposed before cap installation Chimney

Clay Flue Tile Repair

Address cracks, missing sections and joint defects in clay tile; explain access limitations and when a different lining strategy...

View service →
Two George & Sons technicians servicing a brick chimney on a roof Installations

Chimney Installation

Explain appliance/system selection, route/support/termination planning and listed clearances; separate a masonry build from a...

View service →
Glowing coals inside a wood-burning firebox Installations

Wood Stove Installation

Address placement, floor protection, clearances, connector/chimney route and sizing; keep appliance selection separate from...

View service →
A fireplace insert installed in a stone-faced fireplace Installations

Fireplace Insert Installation

Focus on fit inside the existing opening, appliance fuel, chimney/vent compatibility and clearances; do not sell a generic insert...

View service →
A metal flue cap and storm collar on a factory-built chimney Related

Gas Appliance Chimney & Venting Services

Focus on the chimney/vent serving an appliance, compatibility and observed venting concerns; do not imply general furnace, boiler...

View service →

All 76 services →

Serving Missouri, Illinois & Kansas

Ready when you are — available 24/7

Reach the office nearest you, or send your details and we’ll plan the next step.

St. Louis · 314-876-8048 Kansas City · 816-683-1099 Request service

Request Service Call us