Grandview is an established Jackson County city on the south side of the Kansas City metro, with plenty of homes whose chimneys have weathered decades of Missouri rain and freeze-thaw. The most common call we get here is about a leak — and the honest truth is that a chimney leak isn't one problem with one fix. Water can enter at the top (crown or cap), through the masonry body (joints or brick), or at the roof junction (flashing). Each of those is a different component calling for a different repair. So the real job isn't "fix the leak" in the abstract — it's finding where water is getting in, because the repair depends entirely on the location. In Grandview, we diagnose the entry point first, then apply the repair that actually stops it.
Three places water gets in
Here are the three, each with its own repair:
- The top — a cracked crown or a failed/missing cap, letting water into the structure or flue.
- The masonry body — deteriorated mortar joints or spalled brick, letting water through the sides.
- The roof junction — failed flashing where the chimney meets the roof.
A leak can come from any of these, and sometimes more than one. So the first job is finding where water is actually getting in — the heart of a proper leak diagnosis.
Why location determines the repair
This is the principle that matters:
Each location is a different component with a different fix. A top leak → crown repair or a cap. A masonry-body leak → repointing, brick work, or breathable waterproofing. A roof-junction leak → flashing repair.
Using the wrong repair for the location won't stop the water — waterproofing the brick won't fix failed flashing, and new flashing won't fix a cracked crown. So we diagnose the actual entry point first, then apply the repair that addresses it. Pinning down the location is what makes the repair work.
How we find the entry point
We investigate rather than guess:
We examine the likely entry points systematically — the crown and cap at the top, the mortar joints and brick of the body, and the flashing at the roof junction — and correlate them with where the water shows inside. A leak appearing at the ceiling near the chimney often points to flashing; staining higher up can point to the crown. A confident repair depends on correctly identifying the entry point, not just treating the nearest suspect, so we take the time to find it.
Leaks from more than one place
Common on an older, long-exposed chimney:
A failed crown and deteriorated mortar, or a cracked crown and failed flashing, can let water in together. So we don't stop at the first problem we find; we check all three areas, because fixing one entry point while leaving another means the leak continues. Identifying every place water is getting in is what lets us actually stop the leak rather than just reduce it.
Waterproofing — the right kind, for the right problem
A word on waterproofing, since it's often asked about:
If water is soaking through sound-but-porous brick, a breathable (vapor-permeable) masonry waterproofing can help — it repels water while letting the masonry dry. What shouldn't be used is a non-breathable sealer that traps moisture inside the masonry, which can cause worse damage. And waterproofing doesn't fix a cracked crown or failed flashing — those need their own repairs. So we use breathable waterproofing where it's appropriate, as part of the right overall repair, not as a cure-all.
The full range and getting started
From our Kansas City office we serve Grandview with leak diagnosis and repair, crown, cap, and flashing work, repointing and masonry repair, breathable waterproofing, cleaning, inspection, and dryer vent cleaning. Reach us at 816-683-1099, available 24/7 for urgent requests (reachable and responsive, not a guaranteed arrival; a dispatch office, not a storefront). For fire, gas, or CO, call 911 or your utility first.
To get started in Grandview, tell us where you're seeing water — inside near the ceiling, on the chimney, higher up — and when it appears. We'll find where it's actually getting in, at the top, through the body, or at the roof junction, and apply the repair that stops it. Share your address so we confirm coverage. Find the entry point, fix the right thing — that's how a Grandview leak gets solved.