Available 24/7 St. Louis 314-876-8048 Kansas City 816-683-1099
George & SonsChimney Services

From the George & Sons blog

How to Choose and Store Firewood for a Missouri Winter

Glowing coals inside a wood-burning firebox
Glowing coals inside a wood-burning firebox

Good firewood advice should help you make a decision at the woodpile, not just tell you to buy “seasoned hardwood.” A seller's description can be useful, but it is not the same as checking the condition of the wood you plan to burn.

For St. Louis and Kansas City homeowners, start by reading the fuel instructions for the actual fireplace or stove. Then consider moisture, storage, piece size, and the amount you expect to use. Buying a large quantity of unsuitable wood can create a season-long problem that a better stack arrangement cannot immediately solve.

Moisture matters more than a weathered appearance

EPA's archived wood-burning guidance recommends wood with moisture below 20 percent. It also recommends using a moisture meter rather than relying on appearance. The useful lesson is that fuel readiness should be checked, not inferred from gray bark or the word “seasoned.”

Use the testing method provided with the meter and EPA's testing guidance, including checking a freshly split interior surface rather than only the outside of an old piece. A dry exterior can be an incomplete picture of the interior. Check more than one representative piece when assessing a delivery.

Record what you tested and how. If readings vary, do not hide that variation by choosing only the lowest number. Ask the supplier about storage and drying history, and decide whether the wood is ready for current use or should be held for later.

Ask better questions when ordering

Ask when the wood was cut and split, how it has been stored, and whether the supplier can describe its current moisture condition. “It has been outside for a year” leaves several questions unanswered. Large unsplit pieces and split wood stored with airflow do not necessarily dry at the same pace.

Clarify the quantity, delivery arrangement, piece length, and species mix. Check the size requirements of the appliance before ordering. Wood that is awkward to load encourages improvised handling at the hearth and can be inconvenient even if it is otherwise suitable.

If you have limited storage in a St. Louis yard or a Kansas City garage-adjacent space, plan the delivery location in advance. Keep access clear and avoid creating a stack that interferes with exits, service access, or required clearances. Convenience should support safe storage and use.

“Hardwood” is not a complete quality description

Species can affect how a homeowner plans fuel use, but the word hardwood does not prove dryness or suitability. A poorly stored batch with an appealing species name is still a poorly assessed batch. Check the actual fuel and the appliance instructions.

Likewise, do not reject or accept every piece based on one popular internet rule. Your intended use, appliance, and available dry fuel matter. Ask practical questions about consistency and piece size rather than assuming a premium label settles the purchase.

If the household uses the fireplace only occasionally, a smaller known batch may be easier to manage than a large mixed supply of uncertain readiness. If a stove sees steady winter use, planning several months ahead can make storage and testing more manageable.

Store wood so the plan survives rain

EPA's guidance recommends keeping stored wood off the ground, covering the top, and allowing the sides to remain open to airflow. Think about how water drains around the stack, where the cover sheds runoff, and whether the arrangement remains secure in wind.

A cover that encloses the whole stack may be convenient, but it can defeat the airflow you intended to provide. A tidy-looking pile is not necessarily a well-managed one. Check the arrangement after weather changes rather than assuming the original setup stayed effective.

Do not interpret outdoor storage advice as permission to pile fuel against the appliance indoors. Bring in manageable amounts while keeping the required space around the hearth clear. Avoid blocking passages or placing combustible storage where the manual requires clearance.

Separate current-use wood from future-use wood

If some pieces are not ready, keep them distinct so a family member does not accidentally bring them in for tonight's fire. Label or organize the stack in a simple way that everyone understands. The point is consistency, not an elaborate inventory system.

When adding a new delivery, avoid mixing it invisibly with an older supply. Keep enough information to know which batch you are testing. If you later notice a change in burning behavior, that record can help identify what changed without proving a cause on its own.

This is especially useful during a Missouri winter when a household may alternate between regular use and mild periods. A break in use does not make a damp batch ready, and a cold forecast does not change the fuel instructions for the appliance.

Know what does not belong in the firebox

Do not treat a fireplace as a disposal system for painted or treated wood, household trash, or construction scraps. Follow the approved-fuel instructions. An item being made partly of wood does not establish that it is appropriate fuel.

Manufactured logs also require a compatibility check. Some are intended for particular applications. Read both the product directions and appliance instructions before use, and do not combine products or load amounts beyond their permitted use.

Do not use accelerants to compensate for fuel that is difficult to light. If the appliance is hard to operate with appropriate dry fuel and correct instructions, arrange an evaluation. Repeated difficulty can involve the system as well as the fuel.

Better fuel does not replace chimney maintenance

Dry, suitable fuel is part of responsible operation, but it does not establish the condition of the chimney. Keep the inspection and chimney cleaning schedule appropriate to the system. Tell the technician about fuel and use patterns so recommendations have context.

If smoke enters the room or operating behavior changes, stop using the unresolved system and seek advice. A new batch of wood may be relevant history, but it should not be accepted as the cause without evaluation. Fireplace draft repair may require a different investigation from fuel selection alone.

If an inspection identifies problematic deposits, ask about the removal scope and how to prevent avoidable recurrence within the manufacturer's guidance. Creosote removal and a better fuel plan can be related parts of maintenance without being interchangeable services.

A useful woodpile routine

Before the season, identify the ready supply and review piece size. After delivery, check representative pieces and retain order details. After rain or strong wind, inspect the storage arrangement from the ground. Before bringing wood inside, choose from the intended batch and keep indoor storage limited and clear of the heat source.

If several people load the appliance, show them how the supply is organized and where the operating instructions are kept. Consistency at the woodpile is easier than trying to explain an unexplained change in performance later.

Questions homeowners ask

Is six months always enough? A time estimate is not a measurement of the wood's current condition. Splitting, piece size, storage, and other factors matter. Use an appropriate moisture check rather than treating a calendar interval as a guarantee.

Can I dry wood by stacking it beside the stove? Do not place combustible storage within required clearances or use the appliance in an improvised drying arrangement. Plan fuel readiness through appropriate storage, not by creating a heat exposure hazard indoors.

Should I change the appliance because a batch burns poorly? Start with the owner's instructions, fuel assessment, and the system's documented condition. An equipment purchase should follow a clear heating goal and suitability assessment, not frustration with one uncertain delivery.

What if the meter readings surprise me? Review the meter instructions and testing method, try representative pieces, and discuss the result with the supplier. The useful outcome is a reliable fuel decision, not a single favorable reading.

Keep the supply local and traceable

EPA also encourages locally cut firewood to reduce the risk of moving forest pests. When buying, ask where the wood came from and follow any applicable transport restrictions for your trip or destination. Do not assume that a load suitable for home delivery can automatically be taken to a distant campground.

For household planning, traceability has another practical benefit: you can discuss a specific delivery with the supplier if the size or condition differs from the order. Retain the invoice and a few delivery photos before the batches are mixed. If the wood needs more drying time, communicate that clearly rather than relying on a vague complaint that it “does not burn right.” A useful purchase discussion identifies the batch, the measurements, the agreed product, and the next step.

Talk with George & Sons about wood-burning maintenance

George & Sons Chimney Services is a family business founded in 1997, serving the St. Louis and Kansas City areas. Call 314-876-8048 for St. Louis or 816-683-1099 for Kansas City. Requests are accepted 24/7; describe the concern, share your ZIP code, and ask about availability for your address. The useful starting point is what you have noticed and what you want the fireplace to do. An inspection can then establish the condition of the actual system and the next steps.

Sources and further reading

Related services

Services this guide refers to

Heavy creosote and soot buildup around a flue opening before cleaning Cleaning

Chimney Sweeping & Cleaning

Explain what a sweep removes from the flue and connected system; distinguish deposits from damage, and routine sweeping from...

View service →
Heavy creosote and soot buildup around a flue opening before cleaning Cleaning

Creosote Removal

Distinguish loose soot, hard deposits, and glazed buildup; explain why treatment depends on deposit/system condition and is not...

View service →
Glowing coals inside a wood-burning firebox Cleaning

Wood-Burning Stove Cleaning

Cover connector access, baffles and internal pathways, manufacturer-specific disassembly, and the difference between stove cleaning...

View service →
Glowing coals inside a wood-burning firebox Fireplace

Fireplace Smoke & Draft Diagnosis

Separate blockage, damper, pressure/air-supply and configuration concerns; explain why adding a cap or cleaning alone may not solve...

View service →

Continue reading

Two related guides

All blog guides →

Serving Missouri, Illinois & Kansas

Have a question about your own chimney?

Call the office nearest you, or send your details and we’ll plan the next step. Requests are accepted 24/7.

St. Louis · 314-876-8048   Kansas City · 816-683-1099   Request service

Request Service Call us